5. The appliance must be unplugged before any intervention on it: cleaning,general care, maintenance.
6. It is forbidden to operate the appliance on a surface with a slope in excess of 10° with respect to the
horizontal plane. The feet of the machine must always be resting on this surface.
7. The use of spare parts other than certified original parts is prohibited.
8. Never connect several appliances to the same power socket.
9. Never use the machine outdoors.
10. Never place the appliance close to or on a source of heat.
11. This appliance is a professional machine designed exclusively for professional use. It is not designed for
household use.
12. This appliance is not designed for use by people (including children) who's physical, sensorial or mental
capacities are impaired or by people with no experience or knowledge, unless they have been supervised
or given training in the use of the appliance beforehand by a person responsible for their safety. Supervise
children to ensure they do not play with the appliance.
ELECTRICAL CONNECTION
Line protection: The appliance should be connected to a standard 2-pole + ground electric socket. The
installation should be fitted with an RCD and a fuse rated at 16A. The appliance must be grounded.
CARE
Before connecting the machine, check that the mains electrical voltage is the same as the voltage for your
appliance. If the power cable is damaged, it should be replaced by a Omcan approved dealer, Omcan or a
person with similar qualifications to avoid any danger.
Make sure that the on / off switch (6) is on 0 position before plugging the power cord (7) into the mains supply
socket.
USING FOR THE 1ST TIME:
•
Carefully clean all parts of the machine in contact with the food.
•
Remove the anti-splash dome (8) {model no 52}.
•
Remove the cone (1) by pulling it upwards.
•
Remove the bowl (2), the pulp grating (9) {model no 52} and the trim (3) {model no. 38}.
•
Wash the parts with a standard washing up liquid or in the dishwasher.
RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE
This equipment is marked with the selective sorting symbol relating to wastes from electrical and electronic
equipment. It signifies that this product should be taken over by a selective collection system conforming to the
Guideline 2002/96/EC (WEEE) – part Professional Equipment – so that it can be either recycled or dismantled
in order to reduce any impact on the environment. For more information, please contact your Retailer or
Omcan. For eliminating or recycling components of equipment, please contact a specialized company or
contact Omcan. The electronic products not undergoing a selective sorting are potentially dangerous for the
Safety and Warranty
5