operating instructions
EN
5.2
operating by remote control and touch display panel
WARNING
!
•
Do not move or remove the glass panel when the appliance is plugged in and operating. This will cause the
remote conrtol and touch panel to no longer function.
note:
The remote control must remain within 26 feet (8 meters) of the appliance to be effective. This range may be
reduced as the battery power is depleted.
The touch display is shown by LED's on the front bottom right of the appliance. The LED's will disappear after 10
seconds of no function change. The Main Power button will be dim.
Power
Flame -
Colour
Flame -
Brightness
Heater Control
(Flame must be
on for the heater
to turn on).
Timer
Temperature
14
W415-1843 / A / 09.11.18
Turns the appliance ON / OFF.
Controls flame colours.
10 settings:
Yellow-Green-Red-Blue
Yellow
Red
Green
Blue
Yellow-Red
Yellow-Blue
Yellow-Green-Red
Yellow-Red-Blue
Yellow-Green-Blue
Controls flame height.
Makes the flame brighter or dimmer.
Turns the heater and blower ON / OFF.
NOTE: The heater will blow cool air for 10
seconds before the heater turns on and after
it turns off. This prevents the appliance from
overheating.
Controls the timer.
9 settings: 0.5h, 1h, 2h, 3h, 4h, 5h, 6h, 7h,
8h.
NOTE: Press button until desired setting is
reached.
1. Press once to activate touch panel
indicator.
2. Press again until desired setting is reached.
Digital display shows setting circles as below:
Display Value
0
1
2
3
4
°C
18
19
20
21
22
Temperature
°F
64
66
68
70
72
NOTE: Press button for 5 seconds to switch
temperature settings from °C to °F and vice
cersa.
Touch Display Panel
Remote Control
5
6
7
8
9
N
23
24
25
26
27
ON
74
76
78
80
82
ON