Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
4 big terminals for connection with 4 mm diameter plugs or by spade clips tightened
under the terminals. C1 and C2 correspond to the current outputs; P1 and P2 to voltage
measurements. The terminals are marked by colours corresponding to those of the
connection accessories:C1 and P1 are red, P2 and C2 are red, P2 and C2 are black.
2
Rotary switch with 6 positions to select the range and the measurement current
(from 2000 µW /10 A to 200 W /0.01A).
3
ON/OFF button for switching the instrument ON/OFF.
4
Invertor to invert the measurement current to take into account the possible presence
of thermal electromotive forces (principally for the 2000 µW range).
5
LCD.
6
"LOW" and CHARGING" indicators of battery condition.
7
Measurement current "FAULT" indicator.
8
Thermal safety "THERMAL PROTECTION" indicator.
9
Power supply mounted socket for connection of the battery charger lead.
10 Directly accessible screwed fuse holder.
5. DESCRIPTION
25
Publicité
Chapitres
Table des Matières
