EdilKamin MYA Installation, Usage Et Maintenance page 32

ommissioning must be done by a echnical Service entre
authorised by Edilkamin ( A ) prior to ignition and testing
according to the UNI 1068 2012 standard.
his standard indicates the control operations to be carried out
in situ, aimed at ascertaining correct system function.
o ignite for the rst time, it is essential to contact your local
Edilkamin technical service centre ( A ), (for information
see the
according to the type of pellets used and installation conditions,
thereby starting the guarantee.
Failure to have the stove ignited by an authorised .A. . pre-
vents Edilkamin from guaranteeing correct functioning. .
here may be a slight smell of paint the rst few times it is
ignited, however, this will disappear quickly.
Before igniting you must check:
that installation is correct
the power supply
that the door closes properly to a perfect seal
that the combustion chamber is clean
that the display is on standby (the date, power or temperature
ashes).
FILLING THE PELLET HOPPER
he hopper lid opens and closes with a practical click-clack
system. Simply apply slight pressure to the front part of the
cast iron lid ( g. 1-2).
MYA is designed and programmed to burn wood pellets with
6 mm diameter.
ellets are a type of fuel in the form of little cylinders, made
from compacted sawdust, compressed under high pressure
with no adhesives or foreign materials.
hey are sold in bags of 15 kg.
For the stove to function properly, you MUS NO burn
anything else in it. Using other materials (including wood)
will render the warranty null and void. Such use is detected by
laboratory analyses. Edilkamin has designed, tested and pro-
grammed their stoves to guarantee the best performance when
pellets with the following characteristics are used:
INSTRUCTIONS FOR USE
website) to calibrate the stove
*
g. 1
-
g. 2
If pellets with different characteristics are used, the stoves
must be recalibrated a similar procedure to that carried out by
the DEALER when the stove is ignited the rst time.
Using unsuitable pellets may: decrease ef ciency; cause
malfunctions; stop the stove from functioning due to clogging,
dirt on the glass, unburnt fuel, etc.
A simple, visual analysis of the pellets may be carried out:
smooth, uniform length, not very dusty.
with longitudinal and transverse cracks, very
dusty, various lengths and mi ed with foreign matter.
- 32
-
press