Brizo PASCAL 64900 Serie Manuel D'utilisation page 5

3
Connect hoses:
Gently separate the inlet tubes (1)
approximately 1/2 inch minimum. Using the
included 24" braided nylon hoses (2),
connect the larger 1/2-14 NPSM thread to
the inlet tubes on the valve body (1). Use
two wrenches (4) to connect the hoses to
prevent twisting of the copper tubes.
1
2
3
5
3
Connect the smaller 9/16-24 thread on hose
(3) to the stops. Use two wrenches to prevent
damage to the stops during assembly. Note:
Metallic inlet hoses (i.e. copper, braided
stainless steel) can not be used with this
faucet. Nonmetallic hoses must be used in
order for the faucet to operate properly.
4
Wate