Connect Power - Brizo PASCAL 64900 Serie Manuel D'utilisation

8
5

Connect Power:

There are two methods of connecting
power to the control box. AC power using
the included transformer (1) or using
batteries. Plug the transformer into a 110v
AC outlet and the male connector (2) into
the lowest hole (3) in the control box
marked "AC In". Or insert 4 "D" cell
batteries into the battery box (4) as shown
7
3
4
5
on the back of the battery box. Assemble the
battery box with batteries and lid (5) to get
the complete assembly. Insert tabs (6) from
battery box through the slots in the control
box (7) and press in place. Note: If AC
powered, the batteries must also be used
since it provides power backup should AC
power be lost.
10
1
2
4
7
6