EQUATION EF431SLY-V Mentions Légales & Consignes De Sécurité page 64

Press the
Press the '1000W/2000W' button once for the low heat setting; Press the
'1000W/2000W' button twice for the high heat setting; Press the '1000W/2000W'
button for the third time to switch off the heat setting.
Press the DIMMER button to operate the dimmer mode. Repeat pressing can
adjust the brightness.
Press the VOICE button for the fire sound, which has 5 different levels. Repeat
pressing the VOICE button can adjust the fire sound.
The setting temperature can be ajusted from 15°C to 30°C. Press the "+" button to raise
the setting temperature, and press the "–" to lower the setting temperature.
SAFETY CUT-OFF
This appliance is fitted with a safety cut-off which will operate if the fire
overheats (e.g. due to blocked air vents). For safety reasons, the fire will NOT
automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at
least 15 minutes. Reconnect to the mains supply and switch on the appliance.
TROUBLESHOOTING
Symptom
No operation/no fan.
No fire effect light.
EN
button once to turn on the appliance and fire effect.
Check if put the electric plug into the socket.
Check for safety cut-off operation.
Check the LED system by qualified electrician
Solution
64