INSTALLATION AND USER INSTRUCTION GUIDE
Please read all instructions carefully and retain for future reference
When using electrical appliances, basic safety precautions should always be followed.
Do not use the appliance until it is securely fixed as described in this manual.
♦
Check that the voltage indicates on the data plate corresponds with that of the
♦
local network before connecting the appliance to the mains power supply.
Children should be supervised to ensure that they do not play with the appliance.
♦
If the supply cord is damaged, it must be replaced by a qualified engineer in
♦
order to avoid a hazard.
The fireplace heater must not be positioned directly under the power socket.
♦
Keep furniture, curtains and other flammable material at least 1 meter away
♦
from the appliance.
Do not leave the appliance unattended during use.
♦
Do not leave the appliance unattended whilst connected to the mains supply.
♦
Keep out of reach of children and do not allow them to operate this appliance.
♦
This appliance is intended for household use only and should not be used for
♦
industrial purposes.
Do not operate this appliance after a malfunction or after being dropped or
♦
damaged in any way.
Repairs to electrical appliances should only be performed by a qualified electrician.
♦
Improper repairs may place user at serious risk.
♦
Do not run the mains cable under carpets, rugs, etc.
♦
Do not allow the mains cable to hang over sharp edges or come in contact with
♦
hot surfaces.
WARNING: In order to avoid overheating, do not cover the heater.
♦
Do not use this heater with a programmer, timer, separate remote control
♦
system or any other device that switches the heater on automatically, since a
fire risk exists if the heater is covered or positioned incorrectly.
SAFETY INSTRUCTIONS
59
EN