Télécharger Imprimer la page

Lindy 38200 Manuel Utilisateur page 4

Publicité

Les langues disponibles

Les langues disponibles

User Manual
Overview
Transmitter – Front & Back Panels
RS-232 IN
1.
Connect to a PC or Laptop with a 9 Way D cable for the transmission of RS-232 commands.
IR IN 2
2.
Connect the supplied IR Extender cable for IR signal reception. Ensure that remote being used is
within the direct line-of-sight of the IR Extender.
IR OUT 1
3.
Connect the supplied IR Blaster Cable for IR signal transmission. Place the IR Blaster in direct line-
of-sight of the equipment to be controlled.
LAN
4.
Connect to an internet or network connection – never connect to an HDBaseT port.
CAT5e/6/7 OUT
5.
Connect to the CAT5e/6/7 IN port on the Receiver unit with a single CAT5e/6/7 cable for transmission
of all data signals – never connect to a network port. The yellow LED will illuminate to represent the
link from Receiver is stable, if it blinks irregularly it represents a link error or when not illuminated it
means no link with the Receiver. The green LED will illuminate to represent the HDMI signal contains
HDCP.
DC 48V & Power LED
6.
Plug the 48V DC power supply into the unit and connect the adapter to an AC outlet and the LED
will illuminate.
HDMI IN
1
HDMI IN
1.
Connect to HDMI source equipment such as a PC or Blu-ray player.
USB
2.
Connect from PC or Laptop for data transmission or to control the Receiver's USB ports.
COAX OUT 1
3.
Connect to speakers with a coaxial input to receive audio from COAX IN 1 located on the Receiver.
COAX IN 2
4.
Connect to an audio source such as an AV Amplifier, audio is sent to the Receiver's COAX OUT2.
Audio IN L/R
5.
Connect to an audio source such as a CD player, audio is sent to the Receivers AUDIO OUT L/R.
RS 232 IN
IR IN 2 IR OUT 1
1
2
LAN
CAT5e/6/7 OUT
3
4
USB
COAX
OUT 1
IN 2
2
3
DC 48V
POWER
5
6
AUDIO IN
L
4
5
English
R

Publicité

loading