Honeywell RTH8500 Mode D'emploi page 22

Operating Manual
In case of difficulty
Heating or cooling
system does not
respond
69-1901EF—02
Press SYSTEM to set system to Heat. Make sure the temperature is set
•
higher than the Inside temperature.
Press SYSTEM to set system to Cool. Make sure the temperature is set
•
lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• If "Wait" is displayed, the compressor protection timer is on. Wait 5 minutes
for the system to restart safely, without damaging the compressor (see
page 15).
20