EN
Installation
Important: This camera should be placed where the WiFi signal is
strong for optimal performance.
1. Separate the mounting
template on the bottom
of this camera from the
bracket by pressing the
snap as picture shows
2. Mount the template on the
wall by using the supplied
screws
3. Push and press the bracket
of the camera into the
template carefully, and then
adjust the angle to achieve
best shooting effect
Specifications
Image sensor
Sony 1/2.9" CMOS sensor
Min. illumination
Color: 0.01Lux@ (F1.2, AGC ON)
Black and white : 0.001Lux@
(F1.2, AGC ON)
Shutter time
1/50s to 1/100,000s
Lens
2.4mm F2.0
Angle of view
115°
Video compression
H.264
Bit rate
Self-adaption
Max. image resolution
1920 X 1080
Frame rate
20fps (1920 X 1080)
Storage
Built-in microSD card slot, up to 32GB
Wireless standards
IEEE802.11b/g/n
Frequency range
2.4 GHz ~ 2.4835 GHz
Channel bandwidth
20/40MHz Support
Operating conditions
Temperature: 0 °C - 60 °C
(32 °F - 140 °F)
Humidity: < 95% (non-condensing)
Power supply
DC 5V 1A
Power consumption
5W MAX
Dimensions (L x W x H)
80 x 80 x 150 mm
(3.15'' X 3.15'' X 5.91'')
For more detailed Instruction Manual, please check Help in App.
EN