Operating Instructions - Vitamix Creations Elite VM0158 Manuel Du Propriétaire

O P E R AT I N G I N ST R U C T I O N S
Wet-Blade Container
The Wet Blade Container is designed for processing liquids, including juice,
frozen mixtures, sauces, soups, purées, batters and for wet chopping. Before
using this container with programs or the Variable Speed option, always begin
with the Variable Speed Dial pointing to the Stop Symbol ( ) at the top of
the dial.
1. Move the On / Off switch to the On position.
2.
Load the container before placing it on the motor base. Place liquids and
soft foods in the container first, then solid items and, finally, ice. Although
not necessary for blending, you may want to cut or break food into smaller
pieces for more precise measurement of ingredients.
3. Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid cap opening). Make
sure that the lid is securely latched, especially when blending
hot ingredients.
4.
With the motor off, set the wet-blade container on the motor base by
aligning it over the centring pad. Never attempt to put a container onto
an operating motor base or to operate a motor base without a container
properly in place.
5.
Activate the blades by pressing the Start / Stop Switch. Your container may
shift as it is aligned.
• Variable Speed - slowly rotate the Variable Speed Dial to the right to the
desired speed.
• Programs (Pro-750 only) - Rotate the dial to the left of center to the
desired program.
6.
If the mixture stops circulating, you may have trapped an air bubble. To
resolve, insert the tamper through the lid cap and stir until it "burps". If
this does not work, press the On / Off switch to stop the motor. Remove
the container from the motor base and use a rubber spatula to press the
air bubble away from the blades. Return the container to the motor base,
replace the lid and continue blending.
18