Tamper - Vitamix Creations Elite VM0158 Manuel Du Propriétaire

How to Determine the Tamper to use with Your Container
Each type of tamper is designed to be used safely and effectively with a
particular container. If a tamper came with your container, it is the correct
tamper for the container. If a tamper did not come with your container, or you
want to determine if a tamper that you already have can be used with your new
container, please compare your container with the containers and matching
tampers to the illustration below.
Before using the tamper during the blending process, verify that it is the
correct tamper.
• 2,0 L (64 oz.) Short Containers use Tamper 016041 that is approximately
11 inches long.
• 2,0 L (64 oz.) Tall Containers uses Tamper 000760 that is approximately
12-½ inches long.
• 0,9 L (32 oz.) and 1,4 L (48 oz.) Containers use Tamper 015033 that is
approximately 9-¾ inches long.
To verify that you are using the correct tamper, place the lid on an empty
container, remove the lid plug and insert the tamper. If it is the correct tamper
it should easily fit into the opening but will not come in contact with the blades
no matter how you move the tamper inside the container. IF THE TAMPER
TOUCHES THE BLADES AT ANY ANGLE - DO NOT USE THE TAMPER WITH
YOUR CONTAINER.
If you do not have the correct tamper for your container, call Vitamix Customer
services at 1.800.848.2649 or 1.440.235.4840 or e-mail service@vitamix.com
TA M P E R
CAUTION
Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between
different container styles, types, and sizes. Use the tamper
that was supplied with your machine.
.
15