Operation And Use; Color Screen Wire Controller Interface Introduction; Color Screen Wire Controller Function Introduction - Norsup 7026965 Manuel D'installation Et D'instructions

4.

OPERATION AND USE

4. OPERATION AND USE

4.1 Color screen wire controller interface introduction

(1) Main interface
(2) Button Description
NO. Name
ON/OFF
1
Parameter
2
CLOCK
3
Fault display
4
Silent setting
5
MODE
6
Temp. curve
7
Water Inlet Temp.
8
LOCK
⑨

4.2 Color screen wire controller function introduction

(1) Booting and shutdown
As shown in figure 1.1:
In shutdown status, click ① then the unit will be booted
The button function
Press to start /shut off the unit
Click this button to view the unit state and the parameter
Press to set the clock, the timer on or timer off. When the
timer was starting, the button is green
Click to view fault history
Click to turn on/off silent function and to set timing Low
speed function.
Click to enter mode setting and the target temp. Setting
interface
Click to view the temp. and power curve
Click to enter mode setting and the target temp. Setting
interface
Click to lock the screen. Input "22" to unlock the screen by
press the "lock button"