Bond Northwoods TableFire HYUTT50001-5 Guide D'utilisation page 7

4. Insert the threaded post into the
umbrella hole on the tabletop so
that the bottom of the rebowl body
(C) sits ush on the tabletop. Secure
the rebowl body (C) to the table by
screwing the xing nut (F) onto the
threaded post underneath the
tabletop. Be sure to tighten securely.
5. Attach the 2 short glass panels (A)
and 2 long glass panels (B) using
4 brackets (Q). Secure the brackets
(Q) using 16 M6X6 set screws (R).
Do not overtighten.
Place the glass panel assembly onto
the rebowl body (C).
6. Pull back and hold the collar on the
female end of the quick disconnect
connection (H) coupling. Insert the
quick disconnect male end (G) fully
into the coupling and then release
the collar.
C
F
Umbrella hole tabletop
A
B
1
C
C
G
H
2 2 2
1-866-771-2663 | Page 7
R