Wagan Tech Smart AC 150 USB Guide D'utilisation page 3

Important: BEFORE USING YOUR SMART AC POWER INVERTER READ AND
UNDERSTAND THIS OWNER'S GUIDE. SAVE THESE INSTRUCTIONS — THIS
OWNER'S GUIDE CONTAINS IMPORTANT SAFETY INSTRUCTIONS.
OPerATIOn
1. Plug the inverter into your vehicle's lighter socket. If the socket is too
large, adjust the negative connectors using the slide control to ensure a
snug fit. The (green) LED will light up.
2. Plug an AC product into the three prong AC receptacle and turn it on.
Ensure your product draws 150 watts or less of continuous AC power.
To avoid discharging the battery, always remove the inverter from the
lighter socket when not in use.
WArnInGS
• Shock hazard: The Smart AC Power Inverter generates the same AC
power as a normal household wall outlet.
• Do not open (no user-servicable parts inside).
• Do not insert foreign objects into the outlet.
• Do not expose to water, rain or snow.
• Do not connect to power utility AC distribution wiring.
• Heated surface: The inverter housing may become uncomfortably warm,
reaching 65°C (150°F) under extended high power operation.
• During operation, keep the inverter from materials that may be affected
by high temperatures.
• Failure to follow the above may result in personal injury or damage to
the inverter.
Wagan and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Please read before using this equipment
©2009 Wagan Corporation. All Rights Reserved.