SELFSAT SNIPE DOME Manuel Utilisateur page 23

19
Apply silicone around the cable holder.
21
Apply silicone around and on the top of screws.
23
Remove friction tape .
Fix the Controller Bracket (M4x16(2))
a. Use controller cable(Black Color) and Cigar jack adaptor to connect to the Controller.
b. Fix the Controller Bracket at where you want.
c. Place the Controller on the Controller Bracket.
22
20
Fix cable holder on the car roof with 3 of M4x20
screws.
22
Tidy silicon.
24
Connect black cable to the controller(middle)
and grey cable to the receiver(Left).