Safety Information - Kratki HOME EASY BOX Instructions De Montage Et D'utilisation

EN

SAFETY INFORMATION

Due to the possibility of high temperatures, especially on the device's panes, all flammable mate-
rials should be located at a safe distance from the device, including its built-in elements. Children,
elderly people and others should be informed and warned of the possibility of high temperatures
on the appliance during and immediately after its operation and should avoid contact with the
appliance to prevent burns and ignition of clothing.
NOTE: All surfaces of the device and the dedicated HOME EASY BOX, especially in the version with
steel panels, should be treated as working surfaces! This means that during the operation of the
device, all visible parts of the device and its installation can reach very high temperatures, so it is
DANGEROUS to touch any visible surface of the device and its installation during operation and
until it cools down.
NOTE: The device and visible components can be very hot even for several hours after it has been
extinguished. All activities related to fuel replenishment or ash removal should be performed with
heat-resistant gloves!
Young children, infants, infirm persons and other persons requiring special attention in the space
of the device should be under special surveillance. These persons may be particularly vulnerable to
accidental contact with the device. If necessary, the use of safety barriers should be considered to
restrict access to the equipment.
Do not hit or lean on any part of the device.
NOTE: No part of the device may be replaced other than those provided by the manufacturer or
recommended by him.
IT IS STRICTLY PROHIBITED use any liquid or gaseous fuels or other flammable materials to ignite
the appliance!
To avoid accidents, it is not recommended to allow people unfamiliar with the use of the device. For
safety reasons, always use gloves and goggles for maintenance work.
LEMONS OF THE SET - FIRST UNPACKING OF THE PURCHASED HEATER
If you notice any damage or missing items during the shipment inspection, please contact your
authorized dealer.
Please make sure that all parts of the set are not damaged during transport. The inspection should
take place in the presence of the supplier. The purchased heater should contain all the elements
needed to assemble the fireplace and the fireplace:
- Complete, ready to use fireplace.
- Fireplace base with adjustable feet.
- Complete self-assembly with fasteners.
- Instructions for installation and use.
46