EN
NOTE: FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL WITH RESPECT TO INSTAL-
LATION, OPERATION, OR FAILURE TO FOLLOW THE INSTRUCTIONS FOR PERMITTED PARTS
AND ACCESSORIES FOR THIS DEVICE MAY RESULT IN SERIOUS INJURY OR DAMAGE TO PRO-
PERTY.
EACH BUILT-IN MODEL IS A DEDICATED MODEL, THAT IS TO SAY, IT IS DESIGNED FOR INTU-
ITIVE AND QUICK INSTALLATION ONLY OF THE FIREPLACE MODEL THAT IS SOLD WITH THE
BUILT-IN MODEL.
IT IS FORBIDDEN TO INSTALL A FIREPLACE MODEL OTHER THAN THE DEDICATED ONE IN A
DEDICATED FIREPLACE BODY.
THE HOUSING IS DESIGNED FOR INTUITIVE INSTALLATION AT LOW COST AND EFFORT.
HOWEVER, THE INSTALLATION MUST BE CARRIED OUT BY A MINIMUM OF 2 PHYSICALLY FIT PER-
SONS, DUE TO THE NEED TO HANDLE ELEMENTS OF SIGNIFICANT SIZE AND WEIGHT.
BACKGROUND INFORMATION
IMPORTANT: KEEP THIS MANUAL!
It is important to check periodically the integrity and stiffness of the structure itself as well as the
individual building elements for any damage. It should be remembered that every built-in device
is subject to periodic chimney sweep. Any possible inspection or service of the appliance may only
be performed by a qualified chimney sweep/ serviceman with appropriate qualifications. Failure to
observe these rules may result in a serious loss of health or even death and damage to the property.
Installation and use must be carried out in accordance with the applicable national building regula-
tions. Your authorised dealer can help you determine what safety measures to take when installing
or using the appliance. In some cases it may be necessary to obtain a permit to install or operate
such an appliance regardless of the installation scheme of the building and the appliance itself.
Always consult your authorized dealer or building inspector to determine what regulations apply
to the use and/or installation of the appliance in your area. In the absence of regulations governing
installation and use, it is essential that you follow the instructions and the fire safety code.
Do not start up the unit if any of its components have been previously disassembled, damaged
or destroyed. Before reuse, it is essential to replace the missing or damaged part with an original
replacement indicated by the manufacturer.
45