Step 7 Replace The Freezer Drawer; Step 8. Leven The Freezer Drawer - Monogram ZIF360NNLH Instructions D'installation

STEP 7 REPLACE THE FREEZER
DRAWER
ATTACH AND SECURE THE DRAWER FRONT
TO THE SLIDES
A. Pull the slide Mechanism to full extension using both
hands simultaneously.
B. Remove the basket resting on the slides.
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to secure the door
before lifting.
Lift the freezer door and place it on the slide
C.
mechanism
Replace the attachment screws and torque the
D.
screws to 65 in-lb
Adjust freezer door gap if necessary.
E.
Installation Instructions
Align and insert tab on
freezer door bracket into slot
on freezer slide bracket.
STEP 8 LEVEL THE FREEZER DRAWER
Locate the height adjuster cam in the freezer
A.
door. Slightly loosen the three door attachment
screws on both sides using a 3/8" hex socket
driver.
Locate and loosen the cam screw using the
B.
T-27 screw driver.
Cam
Screw
Lift the door on the side requiring adjustment,
C.
rotate the cam to required position.
0 - Initial position
1 - Lift by 0.050"
-1 - Lower by 0.050"
-2 - Lower by 0.100
-3 - Lower by 0.150"
After adjustment tighten the 3 attachment
D.
screws using to 65 in-lb.
10