Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Doc 17 Versie 1
An adjustable bike arm can optionally be assembled between your first bicycle and the Van 'n Bike bike
carrier rack. This means that the handlebars can stay in the normal position during transport. It also
makes sure that the bike handlebars to not hit the rear doors of your vehicle (Camper Van) during an
abrupt braking manoeuvre.
See the demonstration video at this link:
https://youtu.be/H2nDjZmHECs
When using a bike carrier with 3 or 4 bike ramps, so when transporting 3 to 4 bikes, it is recommended
to fit the Heavy-Duty system on the Van 'n Bike bike carrier rack to spread the total weight across
whole the bike carrier rack. You can find this manual on the website under technical documentation:
https://www.vannbike.com/docs/
When reversing, the reversing sensors will detect the Van 'n Bike and start working. If a tow hook
with plug is provided from the factory, the reversing sensors are automatically switched off when the
plug is plugged in. Check whether this is the case. You can go to your dealer for a solution.
6. MAINTENANCE AND REPAIRS:
Van 'n Bike
Damage to the
bike carrier rack such as bent parts, cracks or scratches exclude safe use
Van 'n Bike
Van 'n Bike
of the
bike carrier rack. Do not fit or use the
bike carrier rack if it is damaged.
Repairing damage to the Van 'n Bike bike carrier rack is not allowed. In this case the Van 'n Bike bike
carrier rack must be disposed of by a suitable waste treatment facility in your country or by handing it
in to the manufacturer, Van 'n Bike BV, Kortestraat 12, 2980 Zoersel.
Approved lights have been assembled on the Van 'n Bike bike carrier rack. In the event of a defect,
these may not be put out for ordinary refuse collection. Keep these parts separate and dispose of
them at a suitable waste treatment facility in your country.
Van 'n Bike
Before each trip check the
bike carrier rack for wear. Defective parts must be replaced.
Van 'n Bike
Any change to original parts and materials or to the construction of the
bike carrier rack
Van 'n Bike
can affect safety and effective use. The aluminium parts of the
bike carrier rack have a
coating. If this is damaged the damage must be professionally repaired as soon as possible.
Van 'n Bike
In normal circumstances the
bike carrier rack only has to be cleaned, otherwise it is
Van 'n Bike
maintenance-free. The
bike carrier rack needs no lubricants to continue working properly.
To guarantee smooth operation of the lock pin one can regularly treat it with silicone spray.
Van 'n Bike
- If the
bike carrier rack is used in a coastal area or during the winter, clean it regularly.
Van 'n Bike
Rinsing salt off will extend the working life of the
bike carrier rack.
7. GUARANTEE:
This manual includes a yellow Van 'n Bike guarantee card. You as a customer enjoy an extended
guarantee period of 5 years by filling in the guarantee card and sending it back to us signed. The data
are only processed to help with any recall.
8. VAN 'N BIKE BIKE CARRIER RACK EUROPEAN TYPE APPROVAL:
Van 'n Bike BV declares that this product is in conformity with Directive ECE R26-03 (protruding
parts), and ECE R48-07 (Installation of lighting and light signal devices on M1 vehicles sufficing with
regard to the partial approval E6*R2603/03*0346*00).
See the copy of the certificate at the back in this manual.
16
Publicité
Table des Matières
