Product Overview - Explore Scientific WSH5001 Mode D'emploi

PRODUCT OVERVIEW

1. Press [ MODE ] to view time and alarm, press
and hold to enter time and date setting.
2. Press [ ALARM ] to turn on/off alarm time, press
and hold to enter alarm setting.
3. In setting mode, press [
press and hold to increase rapidly. In non-setting
mode, press and hold to turn on/off RCC.
4. In setting mode, press [
unit, press and hold to decrease rapidly. In other
modes, press to turn on/off the Upper and lower
temperature and humidity alarm. Hold to enter
the Upper and lower temperature and humidity
alarm setting.
5. Press [ ] to activate the backlight for 10
seconds or to activate the snooze function to
delay the alarm by 5 minutes. When connected
to the adapter, the backlight can be set to 4
levels of brightness.
6. Press [ MAX/MIN ] to view temperature MAX/
MIN, press and hold to clear max/min memory.
*Radio-controlled (atomic) clock function may not be available in every territory
4
] to increase one unit,
] to decrease one



 

