PRODUCT OVERVIEW
1. When connect with batteries, press [ light ] to
activate the backlight for 10 seconds or to activate
the snooze function to delay the alarm by
5 minutes. When connect with adaptor, press
the [ light ] button to adjust the brightness.The
setting order: High light --->Low light--->off.
2. Press [ mode ] to switch between time, date,
alarm 1 and alarm 2 display.
3. While in setting mode, press [ ] to increase
one unit, press and hold to increase rapidly.
4. While in setting mode, press [ ] to decrease
one unit, press and hold to decrease rapidly.
5. Press [
] to toggle the display among
current, maximum and minimum recording of
temperature/humidity. Press and hold to clear
the max/min memory records.
6. ICE ALERT Alarm Led.
*Radio-controlled clock function not available in every territory
4
2
1
mode
light
ICE ALERT
sensor
6
3
5
mem
on off
4