Niko 16-640 Serie Guide Rapide page 13

16-640-XX & 16-641-XX
Read the complete manual before attempting installation and activating the system.
1. DESCRIPTION
The 16-640-XX and 16-641-XX are flush mounting external units for flush mounting into exterior or interior walls and belongs to the range Access Control
Design. The flat cable with connectors, the bolt module and the adjustable lighting module are supplied with the flush mounting frame as a standard. The
frame has a flat finishing made of brushed and anodized aluminium. The dimensions of the flush mounting external unit depend on the number modules
to be flush mounted. In reference numbers 16-640-04 and 16-641-04, the '04' refers to a flush mounting frame for 4 modules. A product with reference
number with '641' is provided with a built-in letterbox and a slit for the mail.
Reference Description
16-640-01 flush mounting frame for 1 module (12V DC power supply for LED module to be supplied)
16-640-02 flush mounting frame for 2 modules (adjustable lighting module supplied by the system)
16-640-03 flush mounting frame for 3 modules (adjustable lighting module supplied by the system)
16-640-04 flush mounting frame for 4 modules (adjustable lighting module supplied by the system)
16-640-05 flush mounting frame for 5 modules (adjustable lighting module supplied by the system)
16-640-06 flush mounting frame for 6 modules (adjustable lighting module supplied by the system)
16-640-07 flush mounting frame for 7 modules (adjustable lighting module supplied by the system)
16-640-08 flush mounting frame for 8 modules (adjustable lighting module supplied by the system)
16-641-04 flush mounting frame with flush mounting letterbox (12V DC power supply for LED module to be supplied)
16-641-05 flush mounting frame with flush mounting letterbox for 1 module (12V DC power supply for LED module to be supplied)
16-641-06 flush mounting frame with flush mounting letterbox for 2 modules (adjustable lighting module supplied by the system)
16-641-07 flush mounting frame with flush mounting letterbox for 3 modules (adjustable lighting module supplied by the system)
16-641-08 flush mounting frame with flush mounting letterbox for 4 modules (adjustable lighting module supplied by the system)
16-640-99 customizing (other RAL color)
2. INSTALLATION
Choice of the cabling
Niko recommends the following cables:
- interior cable:
- UTP cat. 5E (max. 100m)
- exterior cable / underground cable:
- UTP cat. 5E OUTDOOR
- ATCUG (armoured telephone cable): 4 x 2 x 0.8mm (This cable is less practical in use, but does guarantee covering longer distances thanks to the
larger wire section). In order to simplify installation, a transition piece from UTP to screw connection is available (16-679-01).
Max. distances:
Ref. Description
Surface mounting
16-64X
external unit
16-657-01 Camera module
16-640(-XX),
16-682(-XX)), Modulare external units
16-680(-XX)
Installation
Make a hole with a min. depth of 110mm in the exterior or interior wall. Only the height of the hole depends on the number of modules (for a survey, see fig.
1 + table 1). Preferably install the camera at a height of ±165cm. The camera is usually mounted underneath the lighting module, but you can choose the
order of the modules yourself. If the external unit is not provided with a camera, preferably install the loudspeaker module at a height of ±145cm.
table 1
Number of Flush mounting height
modules H (mm)
1
2
3
4
5
6
7
8
EN
ATCUG
(4 x 2 x 0,8mm)
300m
300m
200m
Flush mounting width
B (mm)
172 130
252 130
332 130
412 130
492 130
572 130
652 130
732 130
JYSTY UTP cat.5E
(4 x 2 x 0,8mm) (outdoor)
300m 100m
300m 100m
200m 100m
Flush mounting depth
D (mm)
110
110
110
110
110
110
110
110
D
fig.1
13