Selecting Cycle Options; Changing A Cycle Or Option Setting - Whirlpool 940 Serie Guide D'utilisation Et D'entretien

Selecting cycle options

You can press an Option pad after the dish-
washer starts as long as the cycle has not
passed the point that the option is used.
For example, you can press Air Dry any
time before the Drying indicator glows.
After a wash cycle, the dishwasher
remembers the options used and uses the
same options in the next wash cycle unless
new options are selected or the Cancel/
Drain pad is pressed.
High Temp Wash
When High Temp Wash is selected, the dish-
washer heats the water during the
main wash of the Low Energy/
China, Normal, and Heavy cycles.
HIGH
TEMP
Heating the water helps improve
WASH
washing results. The Pots-N-Pans
cycle automatically uses High Temp Wash.

Changing a cycle or option setting

During the first minute
of a cycle
1. Press new Cycle and/or Option pads.
2. Check the detergent dispensers. They
must be filled properly for the new cycle.
After the first minute
of a cycle
1. Press Cancel/Drain. A 2-minute drain
cycle starts. Wait for drain cycle to finish.
2. Press a new Cycle pad.
3. If desired, press one or more Option
pad(s).
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
S ETTIN G THE CO N TRO L S
Air Dry
When Air Dry is selected, the air in the
dishwasher is not heated during
the "dry" portion of a cycle. Using
Air Dry helps save energy, but
AIR DRY AIR DRY
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel
drying. For best drying, use a liquid rinse
agent.
NOTE: The dishwasher automatically
heats the air in the dishwasher during the
"dry" portion of the cycle unless you select
Air Dry.
CYCLES
RINSE LOW
ENERGY
NORMAL
WASH
LATER CHINA
OPTIONS
POTS HIGH
AIR DRY AIR DRY
HEAVY -N- TEMP
PANS WASH
15