Using Cancel/Drain; Selecting Cycle Options - Whirlpool 980 Série Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour 980 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using Cancel/Drain

Press Cancel/Drain to cancel a cycle or
clear option selections.
CANCEL
DRAIN
To cancel a cycle:
• Press Cancel/Drain while the dishwasher
is running to start a 2-minute drain. It will
take a few seconds for the drain to start. If
desired, select a new cycle. (See the
"Changing a cycle or option" section.)

Selecting cycle options

You can press an Option after the
dishwasher starts as long as the cycle is
not past the point that the option is used.
For example, you can press Air Dry any
time before the Drying indicator glows.
After a wash cycle, the dishwasher remem-
bers the options used and uses the same
options in the next wash cycle unless new
options are selected or the Cancel/Drain
pad is pressed.
POWER SCOUR
When POWER SCOUR is selected the dish-
washer adds heat and water
during several portions of the
POWER
Normal, Heavy, and Pots-N-
SCOUR
Pans cycles. The extra heat
and water improve washing
results. The cycle will be longer when you
select the POWER SCOUR feature. The
Pots-N-Pans cycle, with POWER SCOUR
is recommended for baked-on soil.
feature
TM
SETTING THE CONTROLS
• You can press Cancel/Drain again to stop
the drain immediately. Remember to drain
the dishwasher again before starting a
new cycle.
NOTE: A small amount of water remaining
in the dishwasher is normal.
To clear the indicators:
Press Cancel/Drain before starting the
dishwasher to clear all cycle and option
selections.
SANI RINSE
TM
Selecting the SANI RINSE option raises the
water temperature in the final
rinse to 155°F (68°C).
SANI
SANI RINSE is an option with
RINSE
the Pots-N-Pans, Heavy, Normal
and Low Energy cycles. Depending on the
incoming temperature of your water, cycle
times might be longer when you select
SANI RINSE.
NOTE: SANI RINSE raises the temperature
of the final rinse to 155°F (68°C), and main-
tains that temperature 9 minutes. This high
temperature rinse sanitizes your dishes and
glassware.
Air Dry
When Air Dry is selected, the air in the
dishwasher is not heated during
the "dry" portion of a cycle. Using
Air Dry helps save energy, but
AIR DRY
dishes take longer to dry and
some spotting can occur. Some items (such
as plastics) may need towel drying. For best
drying, use a liquid rinse agent.
NOTE: The dishwasher automatically heats
the air in the dishwasher during the "dry"
portion of the cycle unless you select Air Dry.
option
15

Publicité

Chapitres

Table des Matières
loading

Table des Matières