Klein Tools True RMS CL330 Manuel D'utilisation page 14

ENGLISH
CAPACITANCE
1. Insert RED test lead into VΩ jack
COM jack
4
Continuity/Resistance/Capacitance/Diode-Test
NOTE: The meter defaults to Continuity testing in this mode. Press
the "SELECT" button
mode. The Capacitance icon
meter should read 0 nF with test leads open.
2. Remove power from circuit.
3. Measure capacitance by connecting test leads across the
capacitor. The meter will auto-range to display the measurement
in the most appropriate range.
NOTE: When measuring low capacitance (<1nF), the actual
capacitance value is the measured value minus the test lead open
circuit value.
Black lead
14
OPERATING INSTRUCTIONS
, and rotate function selector switch
three times to enter Capacitance testing
12
Red lead
, and BLACK test lead into
5
will appear on the display. The
to the
2
setting.