Klein Tools True RMS CL330 Manuel D'utilisation page 12

ENGLISH
CONTINUITY
1. Insert RED test lead into VΩ jack
COM jack
4
Continuity/Resistance/Capacitance/Diode-Test
NOTE: The meter defaults to Continuity testing in this mode. Ensure
that the Continuity Testing icon
press the "SELECT" button
2. Remove power from circuit.
3. Test for continuity by connecting conductor or circuit with test
leads. If resistance is measured less than 10Ω, an audible signal
will sound and display will show a resistance value indicating
continuity. If circuit is open display will show "OL".
Black lead
DO NOT attempt to measure continuity on a live circuit.
12
OPERATING INSTRUCTIONS
, and rotate function selector switch
12
Red lead
, and BLACK test lead into
5
is visible on the display. If not,
repeatedly until the
to the
2
setting.
icon is shown.