Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
'CALYS' OPTION
Order No.:
'Calys'
is a software to set all parameters of the EPP4 Comfort.
The software is free of charge but you have to buy the specific
cable 496449 to establish the communication with the EPP4.
'Calys'
has 3 levels of use, with 2 different passwords:
View
-
Setting
-
-
Factory
Parameters must be changed within the functional limits of the pressure regulators.
To get the software, you must first order the communication cable 496449, then:
-
Send an email to
This will arrive to our Customer Dpt (CRC), specify you want the Calys software and your order number
-
After a check, they will send you a link and a password to download Calys
-
-
Install the software and use the Help File (pdf), it is the "?" on the page, up right corner. Select first your
language (E, F, D, I), the Help File will be in the same language.
-
Connect the EPP4 to your computer (see below)
-
Re-set the EPP4 to your needs
Connection
Use the specific cable 496449 to connect the EPP4 to your computer:
RS-232
-
M12 connector on EPP B connector
-
Sub-D on computer
-
Select the Port Com in the TOOL menu
-
The "LED" bottom right corner becomes green if
communication is ok
USB
Install the driver from the CD delivered with the USB kit.
Read carefully the manual of the USB kit.
-
M12 connector on EPP B connector
-
Sub-D on USB adapter
-
USB adapter on computer
-
Select the Port Com in the TOOL menu
maku GmbH & Co. KG · 73630 Remshalden · Telefon (0 71 51) 90 39 50 · Telefax (0 71 51) 90 39 5 99 · www.maku-industrie.de
496449 (Communication cable)
view only, no settings possible, no password
for basic settings and maintenance
only for authorized people, all settings
infofcde@parker.com
Parker Lucifer SA
Ch. du Faubourg de Cruseilles 16
CH-1227 Carouge-Geneva, Switzerland
Tel. : +41 22 3077 111
Fax.: +41 22 3077 110
496783
- 7 -
EPP4 Pressure Regulator
408193.doc – Rev.0 / 12.11.2009
Publicité
Table des Matières
