SilverCrest SPMR 8000 B1
Searching for a CTCSS code
If an active channel is found, press the PTT button [12] to use the found channel. Next you can search for
the CTCSS or DCS code being used.
Once a transmission is detected on the selected channel, its CTCSS code (if any) is detected and
displayed.
Pressing the PTT button [12] will cause the handheld transceiver to use that code and
return to idle mode.
Searching for a DCS code
Once a transmission is detected on the selected channel, its DCS code (if any) is detected and displayed.
Pressing the PTT button [12] will cause the handheld transceiver to use that code and
return to idle mode.
22 - English
Press the Menu
will flash on the display. The current channel number will also be displayed.
Press the Up [10] or Down [7] button to scan the selected channel.
Press the Menu
00" will flash on the display. The current channel number will also be
displayed.
Press the Up [10] or Down [7] button to scan the selected channel.
button [6] six times. The indications "SC" and "CTCSS 00"
button [6] seven times. The indications "SC" and "DCS