AppENDIx
Ir LEArNINg
the Ir learning function lets you use an existing remote control to operate the KuBIK oNE. this means that
you can use your tv remote control, or any other remote control to adjust the volume and activate any input
on the KuBIK oNE. to achieve this you must first enable the KuBIK oNE to accept the Ir signals from the
remote you wish to use. follow the simple steps below to activate Ir learning for your remote control.
place yourself in close proximity to the front of the KuBIK oNE. Have both your primary remote control and
the KuBIK oNE remote control ready at hand, and the KuBIK oNE turned on.
NOTE: the KuBIK oNE will automatically exit Ir learning mode if no user activity is detected for 30 seconds.
NOTE: KuBIK oNE Ir learning only works with Ir (Infrared) remote controls. Bluetooth, radio frequency or
Wifi based remote controls will not work.
Even though Ir is a standard, it is sometimes used differently by manufacturers. for this reason, DALI cannot
guarantee that the KuBIK oNE Ir learning will work with all Ir remote controls on the market.
14