Cleaning & Maintenance; Cleaning The Main Unit - Apex XT Fit Instructions D'utilisation

XT Fit /English
4. Adding a Humidifier
humidifier, its power supply is from the power socket outlet of the heated humidifier. DO NOT connect the
power cord to CPAP device and plug into main electrical outlet.
5. Cleaning & Maintenance

6.1 Cleaning the Main Unit

The main unit should be cleaned regularly (at least every 30 days). To clean the unit, wipe it down with a damp
cloth using a mild detergent. When selecting a cleaning agent, take precautions to choose one that is not
chemically abrasive to the surface of the plastic case. All parts should be air-dried thoroughly before use. During
storage, the unit should be kept in a dust-free location.
WARNING:
6.2 Tubing and Mask
The tubing and mask should be checked and cleaned daily. Please refer to the cleaning instruction packaged with
the accessories.
1. Disconnect the air tubing from the air outlet of the device.
2. Remove the air tubing and headgear straps from the nasal mask.
3. Use a mild detergent and prepare the detergent according to manufacturer's recommendations. Tubing and
mask can be washed and rinsed in warm water.
4. Rinse thoroughly and make sure they are completely dry before next use.
5. All items of the mask and air tubing are subject to normal wear and tear and may eventually
be replaced. Replace the mask and the air tubing if they are damaged.
XT Fit CPAP device can be used with XT Heated Humidifier (9S-006500)
which is available from the home care provider. The heated humidifier
may reduce nasal dryness and irritation by providing adequate moisture
and heat to the airflow. Please refer to the XT heated humidifier
(9S-006500) instruction manual for complete setup information.
Don't try to open this device. Repairs and internal servicing should only performed by an
authorized service agent. Don't drop any subject into the air tube or air outlet.
NOTE: When XT Fit CPAP device is used with the heated
11