Apex XT Fit Instructions D'utilisation page 13

XT Fit /English
power socket on the back of device.
NOTE: Once the setting is confirmed, press
back to standby without saving the modification if no action is taken in 20 seconds.
4.4 Flowchart of Menu settings
Enter the user's menu mode by pressing the "
(Ramp Starting Pressure)
(Therapy Pressure)
(Altitude Compensation)
(Compliance Meter)
In each setting, when the preferred value has been selected, press
again to enter next selection.
NOTE: For physicians, please refer to a separated "Physician's Additional Instruction"
page.
Ramp
(Ramp Time)
Ramp P
P
Alt.
TM
(Total Meter)
CM
CM 4 hr
(Session Counter)
c
(Check Value)
"MENU"
button. Otherwise, the device will automatically go
MENU
" butt on.
< 0, 5, 10, 15, ................, 45> min
< 4, 4.5, 5, 5.5, ................, 19> cmH2O
< 4, 4.5, 5, 5.5, ................, 20> cmH2O
< 1, 2, 3, 4, 5, 6, 7, 8> if P set at 4-18 cmH2O
< 1, 2, 3, 4, 5> if P set at 18.5-20 cmH2O
< XXXXX.X > hr
< XXXXX.X > hr
< XXX >
< XXX >
"MENU"
for confirmation and press
10
"MENU"