Control Panel Description - Apex XT Fit Instructions D'utilisation

XT Fit /English
3. Operation
NOTE: Always read the operating instruction before use.

4.1 Control Panel Description

Main control panel and button descriptions:
START/STANDBY
To start the treatment, simply press the
the
Pressure
MENU
When the unit is in "Standby" mode, you can press the
menus. The patient can adjust the "Ramp Up Time" (Ramp), Ramp Starting Pressure (Ramp P) and
Altitude Compensation (Alt). The three other options, Therapy Pressure (P), Compliance Meter
(CM), and Total Operating meter (TM) are to be set only by a physician or other care provider. To
confirm a change to a setting, you must press the
(Menu Option Descriptions) for a detailed explanation.
UP
Press the
DOWN
Press the
"START/STANDBY"
button again. The display will switch between
[ XX.X ]
cmH O in cmH
2
"UP"
button to the increasing values when adjusting configurations.
"DOWN"
button to decrease values when adjusting configurations.
"START/STANDBY"
O unit.
2
"MENU"
button. To stop the treatment, press
[STANDBY]
"MENU"
button to enter the configuration
button again. Refer to section 4.2
7
and Therapy