Multimetrix XG 2102 Notice De Fonctionnement page 9

English
General Instructions (cont'd)
Symbols
used
Guarantee
Maintenance,
metrological
verification
Unpacking,
Re-packing
Case Cleaning
2 MHz function Generator
Attention : Risk of danger. Refer to user's manual
Earth
This equipment is guaranteed against any defect in materials or faulty
manufacture, in compliance with general terms and conditions of sale.
During the warranty period (1 year), the unit can only be repaired by the
manufacturer and only the latter can decide if all or part of the equipment
should be repaired or exchanged. If equipment is returned to the
manufacturer, outward transport will be paid by the customer.
The warranty does not apply after the following:
• Improper use of unit or using the latter with incompatible equipment
• Modifying equipment without prior explicit authorisation from
manufacturer technical departments
• Intervention by a person not approved by the manufacturer
• Adapting for a particular application not planned by the equipment
definition or operating instructions
• Shock, fall or flooding.
The contents of these instructions cannot be reproduced, in any way,
without prior manufacturer agreement.
Before opening the unit, you must disconnect it from the mains power
supply and measurement circuits and make certain there is no static
electricity charge, which might cause the destruction of internal
components.
• Any adjustment, servicing or repair of the unit under power must be
undertaken only by qualified personnel, after acknowledgement of the
instructions in this manual.
• A "qualified person" is a person familiar with the installation, construction,
utilisation and dangers presented. They are authorised to operate and
remove from operation the installation and equipment, in compliance with
safety instructions.
• Return your instrument to your distributor for any work to be done within
or outside the guarantee.
All the equipment was verified mechanically and electrically before shipping.
However, it is wise to proceed with a rapid verification to detect any possible
deterioration which might have occurred during transport; if necessary,
contact our sales department as quickly as possible and express the
appropriate legal reservations to the carrier.
In case of reshipment, use preferably the original packaging and indicate as
clearly as possible, by a note attached to the equipment, the reasons for the
return.
•
Switch off the instrument.
•
Clean it with a moist cloth and soap.
•
Never use abrasive products, or solvents.
•
Let dry before resuming utilization.
9