Enter Password; Wps Connection Setting - Pioneer X-SMC3-k Mode D'emploi

Changing the settings
Use / to select security type, then press
3
ENTER.
Security Select
None
WEP
WPAPSK TKIP
WPAPSK AES
• If you select None.  Step 5
Use /// to enter the Pass Phrase or
4
WEP Key.

Enter Password

[SOUND]
Change Text
[CLEAR]
Delete One Character
• /: Moves the adjusting digit.
• /: Changes displayed character.
• SOUND: Switches character types.
• CLEAR: Deletes one character at a time.
Use / to select DHCP OFF, then press
5
ENTER.
The IP address setting screen is displayed.
Use /// or number buttons to adjust
6
the numbers, then press ENTER.
• /: Moves the adjusting digit.
• /: Increases or decreases values.
• CLEAR: Deletes one character at a time.
• The items shown below are adjustable. For details on
adjustable items, see step 2 in Wired Setting on page 30.
Static IP Address
Subnet Mask
Gateway Address
Preferred DNS/Alternate DNS
Proxy Setup

WPS connection setting

WPS is abbreviation of Wi-Fi Protected Setup. A standard
established by the Wi-Fi Alliance industry group for a function
allowing settings related to interconnection of WPS
compatible wireless LAN devices and encryption to be made
with simple operations.
This unit supports push-button configuration and PIN code
configuration.
Important
• Network Type must be set to Wireless or Auto to use
WPS connection. See page 27 to change the network
type.
1 Press SET UP.
The Initial Setup screen is shown on the main display.
2 Select Network Setting
Use / to select PBC (Push Button
3
Configuration) or PIN Input, then press ENTER.
Select WPS Method
PBC (Push Button Configuration)
PIN Input
• PBC (Push Button Configuration)
Connection settings are made automatically simply by
pressing the WPS buttons on the WPS compatible
wireless LAN device. Follow the instructions on the main
display. This is the simplest way of making the settings,
and is possible when the WPS compatible wireless LAN
device is equipped with WPS button.
• PIN Input
Connection settings are made by inputting the 8-digit
PIN code shown on the main display to the access point
to which you selected. Follow the instructions shown in
Connecting using PIN code configuration on the right.

WPS.
12
31
En