Function Setup - ANT+ smartLAB Mode D'emploi

Definingthedifferentdegreesofactivity:
- Degree 1: No physical exercise
- Degree 2: Only little exercise such as promenades, working in the
garden or gymnastics.
- Degree 3: medium physical exercise ( 30 minutes physical exercise from
2 up to 4 times per week minimum)
- Degree 4: high physical exercise (30 minutes physical exercise from 4
up to 6 times per week minimum)
Please note that the fat calculation is depending on the activity
index. The higher the index the lower the fat calculation will be.
This has physical reasons.

Function setup

After the input of the activity index you will enter the function setup. The
function setup can be set to ON or OFF.
Heart Beat :
Beep 1 : 
Beep 2 :
This is the autmoatic setting function. Switch through the
arrowstoONorOFFandthenconfirmwith„SET".
Alongbeepwillbeheardifthemeasurmentisfinished.
SwitchthroughthearrowstoONorOFFandthenconfirm
with „SET".
3 short beeps for tranfering only weight or 5 short beeps
for transfer of all data. This indicates that the transmission
was successful. Switch through the arrows to ON or OFF
andthenconfirmwith„SET".
Pic. 3
Pic. 4
Pic. 5
33