Specifications; Contents; General Information - ANT+ smartLAB Mode D'emploi

Specifications

1. Device: smartLAB
2. Max. capacity: 150 kg / 330 lb
3. Units: kg / lb (in 100 g / 0,2 lb
steps)
4. Buttons: Set, Go up, Go down
5. Activity indices: 4
6. Adipose: in % for 0,1% steps
7. Content of water of the body: in %
for 0,1 % steps
8. Muscle mass: in % for 0,1% steps
9. Basal metabolic syndrome: in kcal
with 1 kcal per step

Contents

1 smartLAB
fit W Body Analyser Scale
®
1 User manual
4 1,5V „AAA" batteries
4 Carpet extention feet

General Information

• Pleaseplacethescaleonaneven,hardfloor.Theflooristhebasisfor
a correct measurement.
• If possible please use the scale at the same time every day (we
recommend in the morning), after having used the toilet, with empty
stomach and without clothes in order to be able to compare the results.
• Please wait about 15 minutes after getting up before you measure your
body weight so that the water of your body can disperse.
• The adipose can only be detected bare-footed. You can moisten
the soles of your feet. Completely dry feet can result an incorrect
measurement because they do not have enough conductibility.
• Please do not move during the measurement.
• Please wait several hours before measuring after unaccustomed
physical exercise.
fit W
®
10. Active metabolic syndrome: in kcal
with 1 kcal per step
11. User profiles: 8
12. Battery: 4 x AAA batteries (1,5 V)
13. Size (L x W x H): 325x325x19
14. Weight: 1950 g
15. Operating temperature: 10°C-40°C
16. Storage temperature: -20°C - 60°C
17. Symbol when overburdened: „----"
18. Symbol for low batteries: „Lo"
19. Communication/Data transfer:
ANT+ and BLE wireless
27