Using Powerbot - Samsung POWERbot SR2AJ9250W Serie Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using poWerbot

Location recognizing function
fIf the POWERbot is repositioned when the cleaning is not complete or if the POWERbot operates again after
an Information code appears, it searches the current location and cleans the area where was not cleaned
previously.
- When the location recognizing function operates, the POWERbot searches the current location.
- If the searching is failed more than 3 times, the POWERbot will start to clean from the beginning.
Note
f Start the cleaning again at the area within 4 ft (1 m) around where the POWERbot stopped.
– If you start the cleaning at the area more than 4 ft (1 m) from where the POWERbot stopped, it is difficult to
search the location and the POWERbot may clean the area where it already cleaned.
about the boundary markers
Boundary
markers
where a raised spot is below 1.9 in(5 cm)
boundary
markers
where a threshold is above 0.6 in (1.5 cm)
To prevent the POWERbot from entering the following areas, attach
the boundary markers on the floor in the
about 5.9 in (15 cm).
About 5.9 in
(15 cm)
About 1.9 in
(5 cm)
Above 0.6 in (1.5 cm)
where there is a slide, swing, fireplace or any
flammable substance or moisture.
where there is risk of falling such as stairs, porches
or guardrails.
ENGLISH-16
shape at an interval of
About 5.9 in (15 cm)
Boundary
markers
Boundary
markers

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Powerbot r9250

Table des Matières