Damping Wind Speed And Damping Wind Direction; Indicator Type Selection; Calibration; Introduction - Vetus WSD834 Manuel D'utilisation Et Instructions D'installation

3 .5 .5 Damping wind speed and damp­
ing wind direction
Depending on the
setting, the aver-
age for the period
selected as shown
in the table will be
displayed.

3 .5 .6 Indicator type selection

St07
Pt 0
Pt 1
Pt 2
Pt 3
Pt 4
Pt 5
The wind direction is not shown in digital form
when indicator types 6 to 10 are selected.
24
10.0312
and :
St03 St04
damping period
0 s
d0
4 s
d1
8 s
d2
16 s
d3
32 s
d4
64 s
d5
:
Pt 6
Pt 7
Pt 8
Pt 9
Pt10

4 Calibration

4 .1 Introduction

The following calibrations must be carried out
before using the instrument:
• Calibration of wind direction (always)
• Calibration of ship's speed (optional)
These calibrations only have to be carried out
once.

4 .2 Calibrating wind direction

Calibrate the wind direction when it is wind
still.
Sail in a straight line.
The (apparent) wind direction is now from
straight ahead.
Switch on the instrument (see Section 3.1).
Press the SET button
5 times.
will be dis-
St05
played briefly.
The wind direction is
shown by the number
of segments from
'0' (scale is 2x 70˚,
'Close Hauled') and
in degrees from '0'.
The number of
degrees will flash.
Wind speed/ wind direction indicator WSD834
WSD834M135
WSD834M104