Apply Sound Effect Settings; Use Auto Volume Control (Avc); Manage The Power - Pioneer KURO PDP-6020FD Mode D'emploi

Additional Picture and Sound Adjustment Options
When stereo sound is difficult to hear, manually switch to MONO for clearer sound. The panel's sound remains
in mono even if the system receives a stereo broadcast. Reselect STEREO to hear broadcasts in stereo where
available.
Selecting MTS while the input source is INPUT 1 to INPUT 7 or a PC does not change the type of sound. In this
case, the video source determines the sound.

4.7.4 Apply Sound Effect Settings

Your flat panel TV offers four sound effects: SRS FOCUS, SRS, SRS TruBass and SRS Definition.
• SRS FOCUS moves sound source direction vertically and makes sound and voice clearly audible
TM
®
• SRS effortlessly produces a three-dimensional sound field
®
• SRS TruBass produces a clear, rich bass tone
®
• SRS Definition
To activate one or more of the sound effects, follow the directions below.
1 ) Access the Sound
2 ) Select Sound Effect
3 ) Select a sound effect option.
(SRS FOCUS, SRS, SRS TruBass, SRS Definition)
Low
4 ) Select (moderate),
5 ) Press HOME MENU to exit the menu.
Note: How a Sound Effect changes the Audio depends on the signal.
(SRS WOW HD

4.7.5 Use Auto Volume Control (AVC)

Auto Volume Control, or AVC, reduces sudden volume change and compensates source sound level.
To select this option, follow the procedure below.
Sound
1 ) Access the
AVC
2 ) Select from the Sound menu.
On Off
3 ) Select (or
4 ) Press HOME MENU to exit the menu.

4.8 Manage the Power

Your flat panel TV is energy efficient but includes functions to save additional power. In an earlier section entitled
"3.6 Smart Starts for New Owners", you were told how to activate the Energy Save feature. This section provides
more advanced functions to save power and to extend the panel life.
AV/PC Source - Picture Off
To save energy and extend the life of your flat panel TV, have the screen turn Off. To deactivate the screen, follow
the steps below.
1 ) Press TOOLS on the remote control.
2 ) Select Picture Off
3 ) Press ENTER.
The screen display turns Off.
To restore the screen display, press any buttons other than
Note: The Picture Off setting is not memorized by the system.
improves midrange quality and clarifies voice and instrument sound
through the Setup .
from the Sound menu.
Mid High
(standard),
) indicates that SRS FOCUS, SRS, SRS TruBass and SRS Definition are on.
TM
Setup
through the .
).
from the TOOLS Menu.
Off
(enhanced) or for that option.
and
VOL +/–
.
MUTING
04
67
En