Setting up
Sound adjustments
You can adjust the sound quality to your preference with the
following settings.
Adjust the sound to your preference for the chosen AV Selection
option. See AV Selection on page 29.
1
Press HOME MENU.
2
Select "Sound" (/ then ENTER).
3
Select an item to be adjusted (/).
4
Select the desired level (/).
Sound
STANDARD
Treble
Bass
Balance
Reset
Sound Effect
button
Item
Treble
For weaker treble
Bass
For weaker bass
Balance
Shifts the audio balance
to the left
5
Press HOME MENU to exit the menu.
Note
• You cannot adjust the sound for listening with headphones.
• If you perform sound adjustments with headphones connected,
the new settings will become effective as soon as you
disconnect the headphones.
• To restore the factory defaults for all items, press / to select
"Reset" in step 3, and then press ENTER. A confirmation screen
appears. Press / to select "Yes", and then press ENTER.
2
0
0
button
For stronger treble
For stronger bass
Shifts the audio balance
to the right
Sound Effect
You can select from SRS FOCUS, SRS or SRS TruBass.
1
Press HOME MENU.
2
Select "Sound" (/ then ENTER).
3
Select "Sound Effect" (/ then ENTER).
4
Select "SRS FOCUS", "SRS" or "SRS TruBass" (/).
5
Select the desired parameter (/).
SRS FOCUS
Selections
Off
On
SRS
Selections
Off
On
SRS TruBass
Selections
Off
On
6
Press HOME MENU to exit the menu.
Note
•
(WOW) denotes a status where SRS FOCUS
®
®
SRS
and SRS TruBass
are on.
• You cannot adjust the sound effect for listening with
headphones.
• If you change the sound effect with headphones connected, the
new setting will become effective as soon as you disconnect the
headphones.
• The effect of this function differs depending on signals.
®
Deactivates SRS FOCUS
®
Activates SRS FOCUS
Shifts the apparent direction of the
sound upward for more clearly
defined sound
®
Deactivates SRS
®
Activates SRS
Reproduces highly effective three-
dimensional sound
®
Deactivates SRS TruBass
®
Activates SRS TruBass
Provides deep, rich bass using a
new technology
®
08
,
35
En