IKEA KLASEN Manuel D'instructions page 8

6
Keep the ventilation opening of the
cylinder enclosure free and clear from
debris.
Keep the area around your gas barbecue
clear of any combustible materials,
petrol or other flammable liquids and
vapours.
Pressure regulator and hose assembly
supplied with this barbecue must be
used.
Replacement pressure regulators and
hose assemblies must be the same
as those supplied originally with the
barbecue. Never use an adjustable
regulator with this barbecue.
Do not hang any combustible materials
from the hand rails of this barbecue.
Accessible parts may be very hot. Keep
young children away.
Always wear protective gloves or a
barbecue mitt when handling hot
components or items such as pots.
Leak Tests
• IMPORTANT – PERFORM LEAK TESTS
BEFORE USE
• Always leak test the unit – annually, when
dismantled, when parts are replaced, or if
the gas cylinder is removed or replaced.
• Never use an open flame to check for
leaks at anytime. DO NOT IGNITE THE
BARBECUE DURING LEAK TESTING.
• To be performed in a well-ventilated area.
• Be sure all control knobs are in the 'OFF'
position.
• Check for leaks by brushing a solution
of 1/2 water and 1/2 soap over all the
gas system joints, including all valve
connections, hose connections and
regulator connections.
• Ensure the soap solution has been applied
to all connections – connect the regulator
to the gas cylinder, open the gas control
valve on the regulator allowing gas to flow.
• OBSERVE – if bubbles form over any part
of the joints there is a leak.
• Turn off the gas and tighten all joints
• Repeat test. If bubbles form again, do not
use the barbecue. Please contact your local
dealer for assistance.
Gas and Regulator
• The cylinder should be positioned
underneath the main barbecue body and
stored upright.
• Gas cylinders should never be stored or
laid on their side.
User Instructions
• Before assembling your barbecue, remove
all protective packaging from each part.
• The gas cylinder must have a connection
compatible with the regulator supplied
with the barbecue and have a minimum
capacity of 4kg / 9lbs.
• Do not store a spare LP gas cylinder
under or near this appliance.
• Never fill the cylinder beyond 80% full.
Failure to follow these instructions exactly
may result in fire causing serious injury
or death.
• Place dust cap on cylinder valve outlet
whenever the cylinder is not in use. Only
install the type of dust cap on the cylinder
valve outlet that is provided with the
cylinder valve. Other types of caps or
plugs may result in leakage of propane.
Connecting to the Cylinder
• Confirm all barbecue control knobs are in
the 'OFF' position.
• Connect the regulator to the gas cylinder,
hand-tighten it securely (*) and proceed
according to the accompanying assembly
instructions and the instructions from the
gas cylinder supplier.
Cylinders used in USA or Canada
• Are only acceptable for use with the
appliance provided they are compatible
with appliance gas cylinder retention
means. See illustration within this user
manual depicting correct gas cylinder
retention.