Klarstein AURELIA COLETTE Mode D'emploi page 25

Reduce speed/time
• Press the decrease button (1) briefl y several times in succession when the unit is
switched on to reduce the speed.
• If you are in timer mode, briefl y press the decrease button (1) several times in
succession to decrease the time by 1 minute. Press and hold the button to decrease
the time faster.
Increasing Speed/Time
• Press the increase button (3) several times in succession to increase the speed when
the unit is switched on.
• If you are in timer mode, briefl y press the increase button (3) several times in
succession to increase the time by 1 minute. Press and hold the button to increase
the time faster.
Setting the Off Timer/Time
• Press the timer button (4) several times when the power is on to set the power off
timer to 5-60 minutes. Once you have set the time, wait 10 seconds. The timer will
automatically start counting down the time.
• When the timer is off (standby mode), press and hold the timer button (4) for 3
seconds to set the current time. Use the increase/decrease key to adjust the time.
Once you have set the time, wait 10 seconds until the time is automatically set.
Light/Operating Time
• Briefl y press the light button (5) to switch the light on and off.
• Press and hold the light button (5) to display the operating time of the motor. Then
press the light button briefl y to end the test or wait 10 seconds.
Note: If you are using the unit for the fi rst time or it has been in use for more than 14
: If you are using the unit for the fi rst time or it has been in use for more than 14
hours, the fi lter cleaning indicator
press and hold the light button (5) to turn off the cleaning indicator. If you have been
using the unit for some time, clean the grease fi lter as described in the „Cleaning and
care" chapter and then reinsert it. Then press and hold the light button (5) to turn off
the cleaning indicator.
will light. When using the unit for the fi rst time,
EN
25