Kalorik PRO KPRO COG 42565 SS Mode D'emploi page 7

• Position the 6-in-1 Contact Grill & Panini Press on a flat, level and
heat-resistant surface, making sure that it is also positioned at least 6
inches (15 cm) away from any surrounding objects.
• It is recommended to let the 6-in-1 Contact Grill & Panini Press heat
for about 20 minutes without any food in it. This helps to eliminate
grease that may have adhered during manufacturing, and to
eliminate the "new" appliance smell.
• Ventilate the room during this period. When your 6-in-1 Contact Grill
& Panini Press is heated for the first time, it may emit slight smoke or
odor. This is normal with many heating appliances. This does not
affect the safety of your appliance.
Caution: When moving the 6-in-1 Contact Grill & Panini Press, make
sure that you hold it securely and support the base—do not rely solely
on the handle when moving the 6-in-1 Contact Grill & Panini Press!
OPERATING INSTRUCTIONS
Place base on a clean, heat-resistant and flat surface where you
intend to cook, with the controls directly in front of you.
HOW TO INSERT AND REMOVE THE COOKING PLATES:
1. Choose the side(s) you intend to cook
each have two sides:
Grill side: Ribbed surface intended for grilling or searing steaks,
hamburgers, chicken, seafood and vegetables. Can also be
used for panini and other toasted sandwiches.
Griddle side: Smooth surface intended for cooking bacon and
eggs, pancakes and French toast. Can also be used for panini
and other toasted sandwiches.
2. Locate the metal brackets at the back of the housing. Tilt the back
end of the plate and line up the cutouts at the back of the plate
with the metal brackets. Slide the plate underneath the brackets
and push down the front end of the plate. It will snap into place.
Insert the second plate into the upper housing as you did with the
first plate.
WWW.KALORIK.COM
on. T he two cooking plates
7
KPRO COG 42565 SS - 201027