Stanley FatMax TRU LASER TLM200 Mode D'emploi page 10

GB
Measuring Conditions
Measuring Range
At night, at dusk and when the target is shadowed
the measuring range without target plate is
increased.
Use a target plate to increase the measurement
range during daylight or if the target has a bad reflec-
tion.
Measuring Surfaces
Measuring errors can occur when measuring toward
colourless liquids (e.g. water) or dust free glass,
styrofoam or similar semi-permeable surfaces.
Aiming at high gloss surfaces deflects the laser beam
and measurement errors can occur.
Against non-reflective and dark surfaces the
measuring time can be increased.
Care
Do not immerse the unit in water. Wipe off dirt with
a damp, soft cloth. Do not use aggressive cleaning
agents or solutions. Treat the optical surfaces with
the same care that you would apply to eyeglasses
and cameras.
Appendix
Warranty
The Stanley TLM 200 comes with a one (1) year
warranty from Stanley Works. For more information
on the warranty please go to:
www.stanleyworks.com
In case of any questions concerning the warranty
please contact the dealer who you purchased the
instrument from.
All illustrations, descriptions and technical specifica-
tions are subject to change without prior notice.
6
Stanley TLM 200 1.0.0 gb