Usb Mode - Aiwa BBTC-550MG Mode D'emploi

12
en
FM RADIO
You can store up to of your favorite stations
40
in the tuner memory for easy recall at any time.
AUTO SCAN
1. Press the /MODE button repeatedly until
"rd" (radio) function mode appears flashing
on the display.
Once the radio mode has been selected, the
FM/MHz and ST FUNCTION INDICATOR
will appear on the right side of the display.
2. Press the SCAN/ button, and the boombox
will scan and briefly stop automatically
whenever it finds a station with sufficient
signal strength.
The display will update showing the current
3.
station frequency.
4. Turn the TUNING KNOB to the or
positions to view and listen to the scanned
.
radio stations
MANUAL SCAN
1. Press the /MODE button to select "rd"
(radio) mode.
2. Turn the TUNING KNOB to the or
positions to tune to a station. Each turn on
the tuning knob will change the frequency
up or down by 100 kHz.
3. Once you find a station you want to save,
press and hold the PROG button on the
front panel for 2 seconds. "S01" will be
shown on the display; turn the knob to
or positions until the desired memory
position number appears on the display.
Press PROG again to confirm and save the
current station.
4. Repeat steps 2 and 3 to store up to 40
.
stations
PLAYING STORED STATIONS
Press the PRESET/+10 button repeatedly to
select the desired preset number.
Note:
• To remove a preset station, store another
station in it's place.
STEREO/MONO BROADCAST
Select stereo or mono broadcast.
1. By default "ST" (stereo) broadcast is the
setting for the tuner mode.
The display will show briefly the word "ST"
when the stereo mode is set and the
ST FUNCTION INDICATOR will appear on
the right top corner.
To improve the reception when tuning to
2.
stations with weak signal, change the mode
to monaural sound.
The display will briefly show the word "NO"
when the mono mode is set, and the ST
FUNCTION INDICATOR will disappear.

USB MODE

PLAYING MUSIC VIA USB
This boombox has been developed using
the latest technical advances in the USB
field. However, given the wide range of USB
storage device types that are currently in the
market, we unfortunately cannot guarantee
full compatibility with all of them. For this
reason, in rare cases, there may be problems
playing files from some USB storage devices.
This is not due to device malfunction.
Press the button to turn on the unit.
1.
2. Press the /MODE button repeatedly until
the "USb" (USB) function mode appears
flashing on the display.
Once the USB function mode has been
entered, the USB MODE INDICATOR will
appear on the top left of the display.
3. Connect a USB storage device directly
to the USB/MP3 port. The display briefly
shows the number of folders and then
the total number of tracks. Playback will
automatically start after a few seconds.
4. To temporarily stop playback, press the
/SCAN button, and to resume playback,
press it again.
5. Turn the TUNING KNOB to or
positions to select a different track
.
number
6. Press the button to stop playing.
LISTENING TO YOUR TRACKS REPEATEDLY
Press the REPEAT button on the front
panel repeatedly to activate the REPEAT
FUNCTION in the following order:
REPEAT 1
1. (repeat the current track)
2. REPEAT
(repeat all the available tracks)
3. OFF (cancel the repeat function)
CREATING A USB PLAYLIST
The Program feature may be used to program
up to 99 tracks for the USB mode too, in a
programmable playlist.
1. While in stop mode only (no USB playback),
press PROG, and the LCD display will show
the wording "P01" and the "Program"
indicator.
Turn the TUNING KNOB to the or the
2.
positions to allocate the desired track.
Press the PROG button to select and store
3.
the track into the memory.
The program sequence will change to
"P02" to choose the next track.
4. Repeat steps 2 and 3 to select up to 99 tracks.
5. To play the selected tracks (in the program
mode), press the button.
Turn the knob to the position to hear
6.
the previous programmed track or turn it
to the position to hear the next
programmed track.
7. To clear the programmed tracks from the
memory, press the button twice or change
to another function mode.
Notes:
• If there's an incompatible, or no USB
storage device is connected, the display
will show the word "NO".
• Because some storage devices have a
large capacity, USB access time is a little
longer.
• Switch the device to a different operating
mode before you remove the USB storage
device.
• To avoid damaging the boombox or other
devices, do not try to charge any external
device using the USB port.
13