Introduction - Mi-T-M THE WORK PRO WP Serie Mode D'emploi

Congratulations on the purchase of your Work Pro® pressure washer! You can be assured your Work Pro®
pressure washer was constructed with the highest level of precision and accuracy. Each component has been
rigorously tested by technicians to ensure the quality, endurance and performance of this unit.
This operator's manual was compiled for your benefit. By reading and following the simple safety, installation,
operation, maintenance and troubleshooting steps described in this manual, you will receive years of trouble free
operation from your Work Pro® pressure washer. The contents of this manual are based on the latest product
information available at the time of publication. Mi-T-M® reserves the right to make changes in price, color, ma-
terials, equipment, specifications or models at any time without notice.
THESE PARAGRAPHS ARE SURROUNDED BY A "SAFETY ALERT BOX".
TO DESIGNATE AND EMPHASIZE SAFETY WARNINGS THAT MUST BE FOLLOWED WHEN
OPERATING THIS PRESSURE WASHER.
"SIGNAL WORDS" WHICH DESIGNATE THE DEGREE OR LEVEL OF HAZARD SERIOUSNESS. THE
"SIGNAL WORDS" USED IN THIS MANUAL ARE AS FOLLOWS:
DANGER: INDICATES AN IMMINENTLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, WILL
RESULT IN DEATH OR SERIOUS INJURY.
WARNING: INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD
RESULT IN DEATH OR SERIOUS INJURY.
CAUTION: INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED MAY
RESULT IN MINOR OR MODERATE INJURY.
THE SYMBOLS BELOW THIS PARAGRAPH ARE "SAFETY ALERT SYMBOLS". THESE SYMBOLS ARE
USED TO CALL ATTENTION TO ITEMS OR PROCEDURES THAT COULD BE DANGEROUS TO YOU
OR OTHER PERSONS USING THIS EQUIPMENT.
ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ ALL
INSTRUCTIONS BEFORE OPERATING THIS PRESSURE WASHER AND ESPECIALLY POINT OUT
THE "SAFETY WARNINGS" TO PREVENT THE POSSIBILITY OF PERSONAL INJURY TO THE
OPERATOR.
Once the unit has been removed from the box, immediately write in the serial number of your unit in the space
provided below.
SERIAL NUMBER_________________________________
Inspect for signs of obvious or concealed freight damage. If something appears to be damaged, DO NOT RE-
TURN TO PLACE OF PURCHASE. Contact your Customer Service Representative @ 800-228-6172.
Please have the following information available for all service calls:
WP-Cold Water Direct Driven Operator's Manual

INTRODUCTION

! IMPORTANT !
1. Model Number
2. Serial Number
3. Date and Place of Purchase
ACCOMPANYING THE SAFETY WARNINGS ARE
THIS BOX IS USED
3