Install An Sd Card (Optional) - Axis Communications Q60 Serie Guide D'installation

Page 8
8. Put the dome ring with the dome cover back in the original position and tighten the screws.
Make sure to align the bulge on the dome cover with the heater on the camera unit.
Note:
Be careful not to scratch or damage the dome cover. If possible, keep the protective plastic
on the dome cover until the installation is complete.

Install an SD card (optional)

1. Loosen the 4 dome ring screws and remove the dome ring and the dome cover, see illustration
on page 6.
2. Insert an SD card (not included) into the SDHC (Secure Digital High Capacity) card slot.
3. Put the dome ring with the dome cover back in the original position and tighten the screws.
Make sure to align the bulge on the dome cover with the heater on the camera unit, see
illustration on page 8.
Note:
The SD card is automatically mounted when inserted into the SDHC card slot. However,
before removing the SD card it should be unmounted through the camera's web pages. Go
to Setup > System Options > Storage > SD Card and click Unmount. For more
information, please see the User Manual available from the AXIS Network Video Product CD
supplied with this product or from the website at www.axis.com
AXIS Q6032-E/Q6034-E/Q6035-E Installation Guide
Dome cover
Heater