Whale SS5012 Guide D'installation page 5

Supersub
Range
Plumbing
Figure 5
Maintenance
Figure 6
10. Declaration of conformity, standards, approvals
This product complies with all relevant European directives and standards. Please contact Whale® if further details are required
Manufacturer's Declaration
We hereby declare, under our sole responsibility, that the enclosed equipment complies with the provisions of the following EC Directives.
Electromagnetic Compatibility Directive 2004/108/EC, on the approximation of the laws of the Member States relating to electromagnetic
compatibility.
Recreational Craft Directive 94/25/EEC amended by 2003/44/EC
Basis on which conformity is declared
The above equipment complies with the protection requirements of the EMC Directive.
Standards applied
EN55014-1:2006 EMC Emissions
EN55014-2:1999+A2:2008 EMC Immunity
EN28846:1993 Ignition Protection
ISO 8849:2003 Electrically Operated Bilge Pumps
ISO 15083:2003 Bilge Pumping Systems
ISO 10133:2000 Extra-low Voltage d.c. Installations
EN60335-1:2002 Safety of household and similar electrical appliances
EN60335-2-41:2003 Particular requirement for pumps.
Munster Simms Engineering Ltd, 2 Enterprise Road, Bangor, Co Down, N. Ireland BT19 7TA
Tel: +44 (0)28 9127 0531 Web: www.whalepumps.com Email info@whalepumps.com
SS5012 - 19mm (3/4")
SS5022, SS5212 - 19mm (3/4") / 25mm (1")
SS1012, SS1024, SS1212, SS1224 - 25mm (1") / 28mm (1 1/8")
Wipe clean
Date: 1st Jan 2011
Position: Engineering Director
5
EN
Hose Clip
19mm (3/4")